How to Open a Ninja Blender Lid?

After making your smoothie suddenly you realize that the release button is not working, and the lid is stuck. So, how to open a ninja blender lid? There are several tricks that people use to open the lid of their Ninja blender.

You can use hot water or oil to open the blender, which will create suction on the blender and help to release the pressure on it. Or you can use a screwdriver to release the lid from the pitcher. You need to be careful while using any tool for opening, as it can break the lid.

If any of the tricks are not working, give some time to open the blender itself. In this write-up, you’ll get detailed information about these tricks, that you can follow to open your blender’s lid.

Why is My Ninja Blender Lid Stuck?

If you’re using a Ninja blender for the first time, then there is an issue you need to deal with which is opening the lid of the bender. To open the lid, push the release button and pull up the handle. Thus, you can open it.

But then, if the lid doesn’t open, it’s a matter of concern. You’ll be in a mess if your blender’s lid does not open since you can’t use it either. Let’s check the possible reasons out first-

Clogged Lid

The lid of the blender can be clogged at any time, and there are only two things that are the main reasons behind this.

The main reason behind this is if you put a lot of sticky elements inside the jug can cause this. And the other one is if you don’t wash the lid properly and store them incorrectly.

Handle Issue

Sometimes a flaw in the handle can cause a stuck in the lid. A release button should be pressed when you want to remove the lid.

Or you can apply gently the lid of your Ninja blender, which can create pressure on the lumps under the blender handle. When you apply pressure on this, it can also hit the handle hook on both sides.

Meanwhile, push the release button, and the lid will pop up immediately. You will not require any tool for this.

Overfilling

When blending any liquid, if you overfill the jug, it can create pressure inside it. Because of the pressure, the lid can be stuck on the jug, and opening it can be very hard for you. So you have to be careful while filling the pitcher.

Use of Pam Oil Spray

Pam spray can be used to remove the pitcher’s lid. Pam spray must be used on the lid while you’re storing them.

Spray the edge of the lid with Pam or cooking oil which will prevent the lid from getting stuck in the future. With a pitcher, avoid storing it with the lid on. Lightly mist the lid before each use.

Worn Out Components

Your lid gasket can be worn out over time, leading to being stuck in its place. With these worn-out components, it’ll be hard for you to use the same lid.

Water Residue in Lid

After washing the blender’s lid, let it dry completely. The water left on it after washing can be the result of being stuck. This can happen when you wash your blender lid in the dishwasher and don’t dry them thoroughly. Therefore wait or clean with tissue paper after cleaning the blender.

How To Open A Ninja Blender Lid?

As we know, there are several reasons your lid can get stuck. But the question is – how to open a ninja blender lid? When the lid of your blender gets stuck, you can use some solutions to loosen it. Follow these tips carefully-

Wearing Rubber Gloves or Dishcloth

Though it sounds crazy when you try to open the blender’s lid, wear rubber gloves or a dishcloth first. These rubber gloves can help you to twist the lid easily. Just grip the lid tightly and turn it in one direction until it opens.

Hot Water Treatment

You can add another trick: add hot water to a bowl and fill the bottle in it. Let this hot water sit in the pitcher for a couple of minutes, which will help the lid loosen some suction from it.

After 20 to 30 seconds, transfer the blender to cold water. Leave the Ninja blender in the water for 10 to 15 seconds before removing it. Now twist off your Ninja blender lid and open it.

Using Oil Or Water

If the hot water treatment doesn’t work with your lid, you can try this trick. Add some water or oil to the jug, then start the blender at high speed for a short time. This will help you loosen the lid as it has clogs in the seal.

Pry It Open

If you can’t open the lid with the help of water or oil, you can try any tool like a butter knife. Push the lid with the knife from the corner. Before doing this, remember that this is a tricky task that you need to do carefully as this can lead to the lid breaking.

Tweezers Or A Flat-Head Screwdriver

There will be some plastic tabs in the place where the lid attaches to the pitcher. If the plastic tab and the lid don’t work correctly, this inappropriate lid that you placed will not come off and get stuck here.

The tabs can be pulled back with the help of tweezers. Or you can use a flat-head screwdriver instead of tweezers.

While doing your work, ensure that you pull the plastic pieces upwards. When you attach the lid again, you’ll get full suction power.

Wait for a Few Hours

Waiting for a few hours can solve the stuck problem of the lid. Sometimes you mix too many ingredients together, which can cause more suction in the lid. It’ll be harder to open the lid from the blender jug.

If it’s happening to you, just let the time pass and set the pressure to come out by itself. So, try opening the lid after waiting a few hours when the suction is not that strong.

How to Keep Your Ninja Blender Lid from Stuck?

When you want to solve any problem, the main task you have to do is to find out its root causes.

As mentioned earlier, don’t fill your pitcher to the edge, or don’t store them until they are completely dry. If you use your Ninja blender occasionally, it’ll cause an issue with the lid.

As you find all the roots of the issues, you can easily solve the problem now. There’s nothing special to do to prevent these issues. Just do counter-clockwise, which means be careful about these issues and make sure it doesn’t happen next time.

Don’t overfill the pitcher with too many ingredients. It can bounce up when you put all the elements together and the food particles stuck with the lid. This tightens the lid of the blender. To get rid of this issue add less food at a time.

Dry the lid after every wash and check if it is dry when you assemble the blender parts. If you have time, turn the pitcher and the lid upside down after washing it overnight. These tricks will help you not to struggle with a stuck lid.

FAQs (Frequently Asked Questions)

1. Is it necessary to press the release button every time I open the lid?
   • Yes, pressing the release button is an essential safety feature to prevent accidental opening during blending.
2. Can I use a tool to help open the lid if it’s stuck?
   • It’s not recommended to use tools as they may damage the lid or blender. Follow the troubleshooting tips mentioned in the article.
3. Do all Ninja Blender models have the same lid-locking mechanism?
   • While the general concept is similar, there may be slight variations in the design among different Ninja blender models.
4. How often should I clean and lubricate the lid-locking mechanism?
   • Cleaning and lubricating the mechanism every few months or as needed is a good practice to maintain smooth operation.
5. Where can I find replacement lids for my Ninja blender?
   • Replacement lids can typically be found on the official Ninja website or through authorized retailers.

Wrapping up

Whether you run a business or for your family, a blender is a blessing. You need to deal with thousands of issues while using a blender no matter what brand you use. If you’re using a Ninja blender, your lid may be stuck sometimes, no big deal.

Don’t think too much about how to open a ninja blender lid. Here in this write-up, you get several tricks to help you get rid of this situation.

You can use any tricks, and hopefully, one of these tricks will help you to open your Ninja blender lid. Follow the instructions given here, hope one of them will work for you.

Evan Lewis

Evan Lewis is the owner and editor of Indoorguider. By profession, he is a MasterChef in a five-star restaurant. Evan joined as a chef after completing a Diploma in professional cooking. Besides this profession, he’s a researcher and hobbyist blogger. He loves discovering new things, researching them, and sharing them with people who need that information. Most of his time as a chef is spent with different kitchen utensils. He already shares his knowledge and experience with various kitchen tools, utensils, and food blogging. This time he decided to write about one of the most needed kitchen tools and kitchen appliances. Therefore, he created this site, Indoorguider, and shared his experience, knowledge, and research results with people who have less knowledge about this tool. As a MasterChef of a five-star restaurant, Evan Lewis is not only experienced in cooking. He’s also experienced with different kitchen utensils, tools, and equipment. Besides, cooking he’s a hobbyist blogger. He does a lot of research on different kitchen tools for his blog and writes about them to help others, here at IndoorGuider. He shares his experience, knowledge, and research results for the benefit of people seeking different tools and cooking steps, tips, and recipes. Facebook:  https://www.facebook.com/profile.php?id=61555977246806 Instagram:  https://www.instagram.com/evanlewis9177/ Quora:  Reddit: https://www.reddit.com/user/EvanLewisOfficial/  Pinterest:   LinkedIn: https://www.linkedin.com/in/evan-lewis-1157132b8/  Threads: Twitter: https://twitter.com/EvanLewis5656

Sharing is caring!

You Might Also Like:

Best Ninja Blender in 2024 Best Blenders For Nuts And Seeds in 2024 Best Personal Blender in 2024